0% VAT on heat pumps for homes until March 2027

Air source heat pumps installed by a trusted Dorset company

01305 774804 Tell us about the property

Weymouth · Portland · Dorchester

Registered & accredited

  • Gas Safe Register
  • City & Guilds
  • APHC Licensed Member
  • Water Safe

Heat from the outside air, with nothing burned

For residential and commercial properties across West Dorset, air source is often the sensible answer: no ground to dig up, no gas connection needed, and a grant route that takes a real chunk off the cost. We design, install, service and repair them in Weymouth, Portland, Dorchester and the rest of West Dorset.

Our highly experienced heating engineers don't just install your heat pump. They design a system to ensure your radiators, cylinder and pipework are optimised for heating your specific home or business.

Air source heat pump beside a stone garden wall
  • Up to 70%

    Less carbon from a heat pump than from a gas boiler over 15 years, according to UK Government figures.

  • −6°C

    In a government trial, air source heat pumps kept heating UK homes efficiently on days as cold as −6°C.

  • Heat loss

    Calculated room by room before any kit is recommended.

  • One team

    One point of contact from survey through to servicing.

Registered installer

JPF Renewables is a registered installer for major heat pump brands such as Alpha, Samsung and Grant. Our expert engineers will always prioritise the specific needs of your property when designing your system.

  • Alpha
  • Samsung
  • Grant

Is an air source heat pump right for your home or business?

Air source suits a lot of West Dorset homes and business premises. Not all of them. We would rather say so on the phone than after a deposit.

Usually a good starting point

  • Outside space

    There is outside space with room for airflow, service access and a sensible distance from windows.

  • Insulation

    Loft and cavities are insulated, or you are willing to deal with that as part of the job.

  • Current heating

    You have a gas boiler or other fuel heating, and you want to move to renewable heating.

  • Hot water storage

    There is somewhere for a hot water cylinder. An airing cupboard is often enough.

Worth a conversation first

  • Listed or conservation

    Listed buildings and conservation areas, where unit position and permissions need checking.

  • No private outside wall

    Flats or terraces with no private outside wall. Another route may suit better.

  • Solid walls and single glazing

    Solid-wall cottages with single glazing, where the heat loss has to come down first.

  • Nowhere for a cylinder

    Properties with genuinely nowhere for a cylinder.

Outdoor air source heat pump on a gravel bed against a house wall

How does an air source heat pump work?

  1. Outside

    Heat is collected from the air

    Even cold air carries energy. A fan draws it across refrigerant that boils far below the temperature of water.

  2. In the unit

    The temperature is raised

    A compressor raises that heat to the temperatures your radiators and hot water cylinder need.

  3. Cylinder

    Hot water is stored for the building

    The heat pump heats a compatible cylinder so the building has hot water on tap, not only space heating.

  4. Indoors

    Warm water moves through the building

    Compatible radiators or underfloor heating run cooler and for longer than a boiler would.

  5. Controls

    Demand is managed

    Controls decide when the system runs and how demand is split between the building and the cylinder.

The Boiler Upgrade Scheme in brief

The scheme offers a £7,500 grant towards an air source heat pump, or £9,000 if you are off the gas grid and replacing oil or LPG heating, for applications made by 31 March 2027. It covers homes and business premises. An MCS certified installer claims the grant, and that is arranged as part of the installation. Eligibility depends on the property, so ask us before you budget around it.

Ask about current schemes
  1. You own the property

    Owner-occupiers, landlords and many small commercial buildings in England and Wales.

  2. An existing building

    Most new builds cannot claim, though some self builds can. Social housing is not covered.

  3. Replacing your heating

    Gas, oil, LPG or electric heating. Replacing a heat pump you already have does not count.

Four steps to lower carbon heating with JPF Renewables

  1. Talk to an expert engineer

    A phone conversation to understand your property and make sure we are the right fit for your needs.

  2. Survey and heat-loss assessment

    We visit your property and carry out a detailed survey and room by room assessment.

  3. A clear written proposal and transparent quote

    Everything you need to understand our recommended heating system, the costs and the timeline.

  4. Installation is just the start

    Our experienced engineers don't just install your new kit. They will show you how to make the most of your new system and book your first service. We see installation day as the start of our commitment to you, not the end.

Already have a heat pump that needs looking at?

We can repair and service many existing air source heat pumps including those installed by a different company.

Engineer working on an outdoor heat pump unit
Looking after an existing outdoor unit

Air source heat pump FAQs

If your question is not answered, give us a call.

01305 774804
Will it work in an older property?

Age on its own does not decide it. Heat loss, insulation, the radiator sizes you can fit, hot water storage and how the house is used all matter more. We carry out a detailed survey and heat loss assessment that gives you all the information you need to make an informed decision.

Will I need new radiators or a cylinder?

Some radiators are usually fine and some need upsizing for lower flow temperatures. The heat loss calculation says which. A compatible cylinder is normally needed where the system also does your hot water.

How noisy is the outdoor unit?

There is a steady operating sound, and the level varies by model and output. Distance from windows and boundaries, airflow and position are what keep it from being a problem.

Do I need planning permission?

Many domestic installations fall within permitted development, and commercial sites have their own rules. Property type, location, unit position, listed status and local constraints can all change the answer. We check it for your specific address.

How long does the work take?

On average around 2 to 4 days but it depends on the existing system, electrical work, cylinder and radiator changes and access. We give a realistic programme in the written proposal after the property has been assessed, not before.

Can I spread the cost?

The government's Warm Homes Loan Scheme offers low or zero interest loans for heat pumps in homes through participating lenders. It can cover the cost above the Boiler Upgrade Scheme grant, or the whole installation. Credit checks apply.

Can you service a system someone else installed?

We can repair and service many existing air source heat pumps including those installed by a different company. Give us a call and we can confirm based on your specific system.

Give us a call

Our experienced engineers are available to give you expert advice and discuss the specific needs of your property.

01305 774804

Monday to Friday, 9am to 5pm

Depot
Granby Trading Estate: Unit 2, 15 Cambridge Rd, Weymouth DT4 9TJ
Get directions
Areas covered
Weymouth, Portland, Dorchester and across Dorset

Send us a message

Required

01305 774804 Contact us